Most landed cost calculators are built for importers. This one is for the exporter on the other side: you know your EXW or FOB price, and you want to see what that price turns into by the time it sits on a shelf in another country. Enter your price, the shipment costs and the import rates, add the margins the distributor and retailer will take, and the calculator shows the landed cost per unit, the distributor's selling price, the estimated shelf price and your share of it.
Results
- CIF value, shipment
- Import duty, shipment
- Other import fees, shipment
- Import VAT or GST, shipment
- Landed cost per unit
- Landed cost per unit, after VAT reclaim
- Distributor selling price per unit
- Retailer price before VAT
- Estimated shelf price, incl. VAT
In this guide
- What landed cost is
- The landed cost formula
- Incoterms: who pays what
- Where to find duty rates
- How distributors and retailers stack margins
- A worked example
- Using the number in a distributor conversation
What landed cost is
Landed cost is the total cost of getting one unit of your product into the importer's warehouse: your price, freight and insurance to the destination, import duty, import VAT or GST, and the fees paid on arrival such as customs brokerage, port handling and the last delivery leg. It is the number a distributor starts from when it decides whether your product can sell at a price its customers will pay.
For an exporter, it answers a practical question before the first email: if a distributor buys at my price, adds its margin, and a retailer adds another, does the product end up at a shelf price that competes? If it does not, a distributor will see it in minutes, and it is better that you see it first.
The landed cost formula
The calculator uses these steps. Freight, insurance and other fees are totals for the shipment; the result is divided by the number of units at the end.
- Goods value = price per unit × quantity
- CIF value = goods value + freight + insurance
- Import duty = duty rate × customs value (the CIF value in the EU and most countries; the goods value in the US)
- Import VAT or GST = VAT rate × (CIF value + duty)
- Landed cost per unit = (CIF value + duty + other import fees + import VAT) ÷ quantity
- Distributor price = landed cost ÷ (1 − distributor margin), using landed cost without import VAT when the distributor reclaims it
- Retailer price before VAT = distributor price ÷ (1 − retailer margin)
- Estimated shelf price = retailer price × (1 + VAT rate)
If you enter margins as markups instead, steps 6 and 7 become cost × (1 + markup). Two simplifications to keep in mind. The EU adds some transport and handling costs after arrival to the base for import VAT as well, under Articles 85 and 86 of the VAT Directive, so the real VAT can be slightly higher than this estimate. And some products carry more than an ad valorem duty: excise, anti-dumping duty or a duty per kilo. Add those to other import fees if they apply.
The customs value rule matters more than it looks. In the EU, the costs of transport and insurance up to the point where the goods enter the EU are part of the customs value (see the European Commission's customs valuation summary). US law defines the transaction value without the costs of international transport and insurance (19 U.S.C. 1401a). Choose the basis in the calculator that matches your destination.
Incoterms: who pays what
Your Incoterm decides which of these costs sit in your price and which the buyer adds. The International Chamber of Commerce publishes the Incoterms rules, and the US International Trade Administration has a plain summary in Know your Incoterms. For the four terms exporters quote most often:
| Term | You pay | The buyer pays |
|---|---|---|
| EXW (Ex Works) | The goods, ready for collection at your premises | Loading, export clearance, all transport, insurance, duty, VAT and import fees |
| FOB (Free On Board) | Goods, export clearance, transport to the port of shipment and loading on the vessel | Sea freight, insurance, import clearance, duty, VAT and fees |
| CIF (Cost, Insurance and Freight) | FOB costs plus sea freight and minimum insurance to the destination port | Unloading charges not in the freight contract, import clearance, duty, VAT and fees |
| DDP (Delivered Duty Paid) | Everything up to the named place, including import duty and taxes | Unloading at the named place |
Under FOB and CIF the risk passes to the buyer once the goods are on board in your country, even though under CIF you pay the freight. FOB and CIF are meant for sea and inland waterway transport; for containers and other modes, FCA and CIP are the usual equivalents. If you quote EXW, include transport from your premises to the port in the calculator's freight field, because the buyer will pay it and it lands in their cost.
Where to find duty rates
Start with your product's HS code: the first six digits are shared worldwide, and each country adds its own digits after that. Then look up the rate in an official source:
- European Union: TARIC, the EU's integrated tariff, with third-country duties, preferences, quotas and anti-dumping measures. VAT and excise rates are set by each member state and are not in TARIC.
- United States: the Harmonized Tariff Schedule published by the US International Trade Commission. US Customs and Border Protection makes the final decision on the rate that applies.
- Other countries and trade agreements: the International Trade Centre's Market Access Map (free, covers applied and preferential tariffs) and the WTO's Tariff and Trade Data portal.
If your country has a trade agreement with the destination, the preferential rate can be lower than the standard one, but only if the goods meet the rules of origin and you provide the proof the agreement asks for. Treat any rate you find as an estimate until the importer's customs broker confirms it for your exact code.
How distributors and retailers stack margins
Each step in the chain adds its margin on top of the price it pays, so margins multiply rather than add up. A distributor with a 30% margin and a retailer with a 40% margin do not add 70% to your landed cost; in the example below, they more than double it. Margins differ a lot by sector, by country and by how much work the distributor does (holding stock, technical support, marketing), so there is no single typical figure to plug in. Ask the distributors you speak to what margin they need for your category, and enter those numbers.
Two points to settle in the conversation. First, whether they mean margin or markup: a 30% margin on cost of 100 is a price of 142.86, a 30% markup is 130. Second, whether the distributor sells to retailers, to installers and businesses, or straight to end customers. If there is no retailer step, leave the retailer field empty and the calculator treats the distributor price as the end price.
A worked example
The calculator opens with this example: 1,000 units at 20.00 EXW, 1,800 for freight to the destination (including transport to the port), 100 for insurance, 4% duty on the CIF value, 250 of other import fees, 20% VAT, a distributor margin of 30% and a retailer margin of 40%.
| Step | Calculation | Result |
|---|---|---|
| CIF value | 20,000 + 1,800 + 100 | 21,900.00 |
| Import duty | 4% × 21,900 | 876.00 |
| Import VAT | 20% × (21,900 + 876) | 4,555.20 |
| Landed cost per unit | (21,900 + 876 + 250 + 4,555.20) ÷ 1,000 | 27.58 |
| Landed cost after VAT reclaim | (21,900 + 876 + 250) ÷ 1,000 | 23.03 |
| Distributor price | 23.026 ÷ 0.70 | 32.89 |
| Retailer price before VAT | 32.894 ÷ 0.60 | 54.82 |
| Shelf price incl. VAT | 54.824 × 1.20 | 65.79 |
Your EXW price of 20.00 is about 30% of the 65.79 shelf price. If similar products sell for 50 on that shelf, the gap is not closed by a small discount: you would need a lower EXW price, cheaper freight per unit (a fuller container), a lower duty through a trade agreement, or a shorter chain, for example a distributor that sells straight to businesses.
Using the number in a distributor conversation
A distributor works this out the moment it reads your price list, so it helps to arrive with the numbers done. Know your landed cost for the market, the shelf price it implies, and how it compares with what is already on sale there. If you can show that your product leaves the distributor its usual margin and still lands at a competitive price, that is a stronger first message than a catalogue. For the rest of the search, from building a candidate list to the first email, see how to find distributors in other countries.
Outfound can do the market side of this for you. Its market research compares candidate markets for one product, puts your price next to tariff and freight assumptions for each country, and lists the costs still to confirm before you quote. Once you choose a market, Outfound finds distributors there, checks each one on its live website, and writes the first email for each company. Research packs and plans are on the pricing page.
Last updated: · By: Tolga Tatar
